Condition: 100% Brand New
Item Type: Snow Blower
Material: Engineering Plastics + ABS + metal
Color: As shown in the picture
Machine: Approx.54.5x50x35cm/21.5×19.7×13.8in(H x L x W)
Long Air Hose: Approx.38cm / 15.0in
Short Air Hose: Approx.34cm / 13.4in
Flexible Pipe: Approx.34cm / 13.4in
Flat Pipe Length: Approx.59.5cm / 23.4in
Flat Pipe Nozzle: Approx.14cm / 5.5in
Engine Type: Air-cooled two stroke
Discharge Capacity: 85cc
Airflow Speed: 89m/s
Air Volume Drift Rate: 17㎡/min
Revolving Speed: 6800r/min
Engine Oil Capacity: 220mL
1 x Two Stroke Machine
1 x Matching Pot
2 x Air Hose
1 x Flat Pipe
1 x Flexible Pipe
2 x Clamp
2 x Strap Buckle
1 x Multipurpose Wrench
1 x Instruction Manual
1 x Sleeve
1. It should be added with two-stroke special oil. You’ll’t use four-stroke engine oil or other oil, differently it’s going to cause damage to the internal parts of the engine.
2. Please allow 1-2cm error because of manual measurement. Thanks for your understanding.
Multi-purpose machine, sweeping leaves, removing snow from greenhouses, cleaning roads, dust removal on roads, slag blowing at construction sites, sanitation cleaning, blowing small stones, etc.New and upgraded high horsepower two stroke, large air volume, stable and durable performance.
It can effectively extinguish the fire of shrub forest, grassland and forest surface.New streamlined fuselage design, ergonomic care for, comfortable grasp, more humanized.Equipped with throttle switch, lock switch, flameout switch, no wish to press for a very long time, comfortable adjustment, simple operation.
Wide shoulder straps protect cervical spine, breathable and comfortable.Thickened air hose, high-quality new ABS plastic material, light, flexible, high temperature resistant and flame retardant.Fine carburetor, double copper nozzle disc film technology atomizing gasoline, more fully used, fuel saving.
Dust proof cooling hole, prevent dust from entering the body, heat dissipation fast, can make the engine keep low temperature for a very long time. With large capacity oil tank that can add mixed oil, the ratio is 25(gasoline):1(engine oil).
Startup Instructions:1. Press the oil bubble to supply oil before each start, and press the oil to enter the oil pipe. 2. Push up and open the ventilation door. 3. Pull the care for 5-8 times, and when the machine hears the ignition sound, push the ventilation door back. 4. Close the ventilation door, pull the care for again 1-3 times to start most often